Payment & Security
Your payment information is processed securely. We do not store or have access to your credit card details.
Enjoy 0% surcharge on credit card payments.
Description
Cisco Power Injector for Cisco Aironet 2800/3800 Access Points
SKU: AIR-PWRINJ6
The Cisco Aironet Power Injector AIR-PWRINJ6= increases wireless LAN deployment flexibility of supported Cisco Aironet Access Points by providing an alternative powering option to local power, inline power-capable multiport switches, and multiport power patch panels.
The single-port PoE injector provides up to 30 Watts and is compliant with IEEE 802.3af (15.4 W) and IEEE 802.3at (30 W) systems. This power injector is for use with Cisco access points requiring 802.3at power input.
Cisco Aironet Power Injector (AIR-PWRINJ6=) Features
Status LED1 |
|||
The Status LED indicates the following system status events:
- AC Power - Depending on the model, the LED is amber or blinks green to indicate that the Power Injector is powered ON and ready for connection.
- AP Power - The LED lights solid green to indicate that a valid IEEE 802.3af or 802.3at load (AP) is detected and powered ON. The LED remains green when powering the Access Point even if the uplink is not connected. The LED is green for showing that the power injector is providing power to the Access Point.
Figure 2 shows a typical installation scenario.
Figure 2 Power Injector AIR-PWRINJ6= Installation Scenario
Unpacking the Power Injector
The typical power injector package contains the following items:
If any item is missing or damaged, contact your Cisco representative or reseller.
Additional Requirements
Use the power cord that shipped with your power injector to supply power for the injector. If you install the access point in an environmental air space such as above a suspended ceiling, check national and local safety codes to make sure that the Ethernet cable you connect to the unit meets applicable standards.